Overview
Technical Specialist I – Shipping Freight Jobs in Coralville, IA at CIVCO Medical Solutions
Summary
The Technical Specialist I – Freight Shipping position is essential to daily freight shipment and includes long-term freight ownership for the Shipping department. This position will incorporate all basic Shipping skills and job functions while concentrating mainly on advanced freight functions. This position will ensure all standards (operational, safety, and quality) are being followed, and ensuing proper paper work and/or documentation is completed and filed. Skills essential to this position include the ability to be organized, ability to set priorities and respond to changes in workload and demands, ability to communicate effectively, ability to innovate and work collaboratively with other areas.
Primary Responsibilities include the following. (Other duties may be assigned.)
Complete shipping workload including shipment packaging, cost estimations, communication with customer selected carriers, and information requests
Effectively respond to customer service, production, and or quality issues as they arise
Ensure proper paperwork and/or documentation is always being maintained for all types of shipments
Ensure all operational, safety, and quality standards are consistently being followed and take appropriate action when required
Perform all work activities in observance of the CIVCO Values and in an effort to create a successful work environment
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education, Experience and Certifications
High school diploma or General Education Degree (GED); and one to two years related experience and/or training; or equivalent combination of education and experience.
Knowledge, Skills and Abilities
Ability to read and understand written instruction
Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.
Ability to listen to and understand information and ideas presented through spoken words or sentence
The ability to communicate ideas in verbal and written format so others will understand
Near vision- The ability to see details at close range (within a few feet of the observer).
Ability to demonstrate secondary level computer skills including XA
Ability to demonstrate secondary level math and computation skills
Ability to walk while carrying weight, sit and stand as needed, climb ladders, lift, push, pull, and use whole body movements to complete tasks
Ability to work in a team environment and provide direction to others
Ability to determine and set priorities for the team to meet production and customer needs
Regular attendance is required for the ability complete all work.
Requires face-to-face interaction with team members, peers and management to complete all work and provide support.
Ability to work more than 40 hours per week (overtime) if needed based on business demand.
Work Environment
The work environment characteristics described here are representative to those an employee encounters while preforming the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The noise level in the work environment is usually frequent.
Environmental temperature between 65 to 85 degrees
Physical Demands
Definitions:
Never Not performed or required.
Seldom/Rare One time per hour up to 8 times per 8-hour shift.
Occasional Up to 1/3 of day; 1 x every 30 minutes; 1 – 4 hours (8-hour shift)
Frequent 1/3 to 2/3 of day; 1 x every 2 minutes; 4 – 6 hours (8-hour shift)
Constant Greater than 2/3 of day; 1 x every 15 seconds; 6-8 hours (8-hour shift)
Sit – Occasional: Sitting may be required when working at computer
Stand – Constant: Workers stand on level concrete surfaces for the majority of work. Workers will be required to stand at a computer, frequently. Workers may also stand on stair ladders.
Walk – Constant: Walking throughout the warehouse locations is required. Worker will negotiate around other people, equipment, racks, cases, and pallets. Walking is required from various parts of warehouse to shipping area which can be up to 100 yds.
Steps – Frequent: Employee must be able to negotiate to 10-inch steps on step style ladders to reach cases and boxes of product. Step style ladders have 10-inch steps and rails on bilateral sides.
Low Level Work – Frequent: Defined as a low-level work position with worker squatting, kneeling or half kneeling. Low level work includes going to pick cases off pallets 6 inches off floor and to reaching under storage rack to the back of pallets which requires workers to bend or squat to avoid second tier of rack which is a height of 48 inches. Worker will frequently load boxes of product onto a shelf of a 4-wheel cart with a shelf height of 8 inches using bilateral upper extremities. Workers will frequently pack boxes of product into shipping boxes at floor level up to at least 28 inches using bilateral upper extremities.
Balance – Constant: Worker must maintain balance to prevent falling when walking, standing, negotiating stairs and, or crouching on level concrete surfaces. Workers must maintain balance while climbing up and down step style ladders (4 steps) while carrying cases of product frequently.
Bend/Stoop – Frequent: Defined as bending body forward or laterally by bending spine at the waist, requiring use of the lower extremities and back muscles. Frequently, workers must bent/stoop over 28-inch-high box side while packing shipping boxes with product from floor level to at least 24 inches. Workers must be able to tape boxes packed for shipping requiring bend/stoop over the box to reach edges of the box. Worker will also need to bend/stoop from floor level to at least 28 inches to reach air pillows. Building boxes is required frequently, which may require a bend/stoop depending on the size of the shipping box.
Reach – Occasionally: Workers must be able to reach to a height up to 67 inches to reach full shipping boxes on the top of a pallet. Frequent: horizontal reach up to 28 inches to tape shipping boxes with BL UE. Workers must reach a height of up to 60 inches to stack product on to 4-wheel carts. A step style ladder is available for assistance. Rare: workers will be required to reach to 82 with use of step ladder to pick or place cases or product (with use of step ladder).
Twisting – Rarely: Workers have space to allow squaring body up to work activities and pivoting entire body rather than twisting.
Handle/grasp – Constant: Handling/grasping is required with cases, carts, labels, box cutters, unfolded corrugate bundles, taping handles, and full boxes ready for shipping with bilateral upper extremities.
Fine manipulation – Frequent: Bilateral fingering or key/pinch grasp is used for tasks including peeling and removing labels/stickers, removing product from boxes, gripping pallet jack handle, scanning, taping handles, tearing air pillows, and opening cases, use of BL UE to fold product and shipping boxes and work at a computer requiring keying and moussing.
Lift – Occasional: Workers will lift up to 37-50 lbs GUS and cases of gel from heights of 4-17 inches to heights of 6 – 32 inches. Frequent: Workers will lift 2-20 lbs from heights 6 – 82 inches (step ladder assistance) and place on cart at 8- 50 inches. Rare: Workers will lift shipper boxes with 2 person lift weighing 82 lbs to 36 inches.
Carry – Occasionally: Up to 45 lbs cases will be lifted from heights between 6 to 26 inches and carried up to 3 feet to be stacked at a height of 32 inches on a 4-wheel cart. Frequent: Up to 15lbs cases will be lifted from heights between 6-67 inches and carried up to 5 feet to be stacked on a cart of 32 inches or on a cart of on shelves ranging from 6-67 inches. Occasionally: workers carry unfolded corrugate bundles weighing 13lbs up to 100 feet and up a step style ladder. Rare: Workers will carry cases weighing up to 32 lbs up and down 3 steps on step ladder. Frequent: workers will carry cases weighting 2- 20 lbs up and down 3 steps on step ladder. Rare: Workers will be required to carry paper boxes weighing 46 lbs least 5 feet to place on a cart at 32 inches.
Push/Pull – Frequent: Workers will push/pull a full metal shelving unit or a 4-wheel cart at least 150 feet with a force of up to 30 lbs with BL UE at a below shoulder height. Workers will frequently push/pull of pallet jack to move pallets with product stacked on pallet requiring at least 25 lbs of force up to 150 feet. Ability to push/pull shipping boxes with a force of 40 lbs of force on a smooth concrete surface at a distance of at least 10 fee
Marginal Functions: Functions that the individual who holds this position may perform but are not required of all individuals performing the work.
1 Operate forklift.
2 Work at a computer.
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c)
Title: Technical Specialist I – Shipping Freight
Company: CIVCO Medical Solutions
Location: Coralville, IA
